Are you looking for a way to upgrade your PC storage? Do you want more space, speed, and reliability for your files and applications? If yes, then you should consider getting a 4TB NVMe SSD.
A 4TB NVMe SSD is a type of solid-state drive (SSD) that uses the PCIe interface to deliver fast data transfer rates. It can store up to 4 terabytes (TB) of data, which is enough for most users. It can also improve your PC performance by reducing boot time, loading time, and power consumption.
In this article, you will learn:
- Why a 4TB NVMe SSD is better than other types of SSDs
- What are the latest trends and updates in the 4TB NVMe SSD market
- Which 4TB NVMe SSD models are the best for your PC
Why Choose a 4TB NVMe SSD?
A 4TB NVMe SSD has several advantages over other types of SSDs, such as SATA SSDs or HDDs. Here are some of the benefits of a 4TB NVMe SSD:
- More storage space: You can store more games, programs, photos, videos, music, and documents on your PC with a 4TB NVMe SSD. You don’t have to worry about running out of space or deleting old files. More free space also means better system performance, as it reduces fragmentation and improves caching.
- Faster speeds: A 4TB NVMe SSD can deliver sequential read and write speeds of up to 5000 MB/s and 4200 MB/s, respectively. This is much faster than SATA SSDs, which typically max out at around 550 MB/s and 520 MB/s, respectively. This means you can boot up your PC, load your games and applications, and transfer your files in a fraction of the time it would take with a SATA SSD or an HDD.
- Lower power consumption: A 4TB NVMe SSD consumes less power than SATA SSDs or HDDs, as it does not have any moving parts and uses the PCIe interface, which is more efficient than the SATA interface. This can help you save on your electricity bill, extend your laptop battery life, and reduce the heat and noise generated by your PC.
- Higher reliability: A 4TB NVMe SSD is more reliable than SATA SSDs or HDDs, as it has fewer components that can fail, wear out, or get damaged by physical shocks or vibrations. It also has advanced features such as error correction, wear leveling, and encryption, which can protect your data from corruption, loss, or theft.
What’s New in the 4TB NVMe SSD Market?
The 4TB NVMe SSD market is growing, as more manufacturers are releasing new models that offer improved performance, features, and value. Some of the latest trends and updates in the 4TB NVMe SSD market are:
- PCIe 5.0 support: PCIe 5.0 is the latest generation of the PCIe interface, which doubles the bandwidth of PCIe 4.0, allowing for faster data transfer rates between the SSD and the CPU. PCIe 5.0 SSDs are expected to reach sequential speeds of up to 10,000 MB/s and 9,000 MB/s for read and write, respectively, which are twice as fast as the current PCIe 4.0 SSDs. PCIe 5.0 SSDs are compatible with PCIe 4.0 and PCIe 3.0 motherboards, but they will operate at lower speeds. PCIe 5.0 motherboards are currently available for Intel’s 13th-Gen Raptor Lake and AMD’s Zen 4 Ryzen 7000 processors, which support PCIe 5.0 natively.
- New controllers and NAND flash: The performance and efficiency of NVMe SSDs depend largely on the controller and the NAND flash chips that they use. The controller is the brain of the SSD, which manages the data flow, error correction, encryption, and thermal management. The NAND flash is the memory of the SSD, which stores the data in cells that can be accessed randomly. New controllers and NAND flash technologies are being developed and released, which can offer higher speeds, lower latency, higher endurance, and lower cost per GB. Some of the latest controllers and NAND flash technologies are:
- Phison E18: Phison is one of the leading SSD controller makers, and its E18 controller is one of the fastest and most powerful PCIe 4.0 controllers in the market. It supports up to 8 channels and 32 NAND flash chips and can deliver sequential speeds of up to 7400 MB/s and 6800 MB/s for read and write, respectively. It also supports 3D TLC and 3D QLC NAND flash, as well as AES 256-bit encryption, LDPC error correction, and NVMe 1.4 protocol. The Phison E18 controller is used by several 4TB NVMe SSDs, such as the Sabrent Rocket 4 Plus, the Seagate FireCuda 530, the Team Group Cardea A440 Pro, and the Netac NV7000.
- InnoGrit IG5236: InnoGrit is a relatively new SSD controller maker, but its IG5236 controller is one of the most advanced and efficient PCIe 4.0 controllers in the market. It supports up to 8 channels and 16 NAND flash chips and can deliver sequential speeds of up to 7000 MB/s and 6000 MB/s for read and write, respectively. It also supports 3D TLC and 3D QLC NAND flash, as well as AES 256-bit encryption, LDPC error correction, and NVMe 1.4 protocol. The InnoGrit IG5236 controller is used by the Solidigm P44 Pro 4TB NVMe SSD, which is one of the fastest and most affordable 4TB NVMe SSDs on the market.
- Micron 176L 3D TLC NAND: Micron is one of the leading NAND flash makers, and its 176L 3D TLC NAND is one of the latest and most advanced NAND flash technologies in the market. It uses 176 layers of cells stacked vertically, which allows for higher density, lower cost, and lower power consumption than previous generations of NAND flash. It also offers higher performance and endurance, as it uses a faster and more reliable charge-trap cell design, and supports the Toggle DDR 4.0 interface, which doubles the data transfer rate of the Toggle DDR 3.0 interface. The Micron 176L 3D TLC NAND is used by several 4TB NVMe SSDs, such as the Crucial P3 Plus, the Samsung 990 Pro, and the WD Black SN850X.
Which 4TB NVMe SSDs Are the Best for Your PC?
If you are looking for a 4TB NVMe SSD for your PC, you have many options to choose from. However, not all 4TB NVMe SSDs are the same. They differ in terms of performance, features, and value. To help you make the best decision, we have selected some of the best 4TB NVMe SSDs you can buy right now, based on their specifications, reviews, and prices. Here are our top picks:
| Model | Controller | NAND Flash | Sequential Read Speed | Sequential Write Speed | Warranty | TBW Rating | Price |
|---|---|---|---|---|---|---|---|
| Samsung 990 Pro 4TB | Samsung Phoenix | Samsung 96L 3D TLC | 5000 MB/s | 4200 MB/s | 5 years | 1200 TB | $799.99 |
| Crucial P3 Plus 4TB | Silicon Motion SM2267 | Micron 176L 3D TLC | 5000 MB/s | 4200 MB/s | 5 years | 800 TB | $549.99 |
| Solidigm P44 Pro 4TB | InnoGrit IG5236 | Micron 96L 3D TLC | 7000 MB/s | 6000 MB/s | 5 years | 1200 TB | $599.99 |
| Sabrent Rocket 4 Plus 4TB | Phison E18 | Micron 96L 3D TLC | 7400 MB/s | 6800 MB/s | 5 years | 1400 TB | $749.99 |
As you can see, each model has its strengths and weaknesses. You should consider your own needs, preferences, and budget before buying a 4TB NVMe SSD. However, based on our analysis, we recommend the Crucial P3 Plus 4TB as the best value-for-money option, as it offers high performance, low power consumption, and a reasonable price.
Conclusion
A 4TB NVMe SSD can be a great upgrade for your PC, as it can offer more storage space, faster speeds, lower power consumption, and higher reliability than other types of SSDs. However, you should also be aware of the latest trends and updates in the 4TB NVMe SSD market, and compare the different models available to find the best one for your PC.
We hope this article has helped you learn more about 4TB NVMe SSDs, and how they can benefit your PC experience. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading!
Check out more articles!
